Blog
Posted 30th October 2017
Posted 9 years ago
By Unknown
12 slotted Nuts
12 yes TWELVE slots on a nut so small... Yes, we machined them with accuracy, ease and speed. These type of slotted nuts tend to go on parts where a degree of fine rotation is needed in...
Posted 25th October 2017
Posted 9 years ago
By Unknown
Non Preferred Sizes
All fastener standards have specific sizes which are commonly used. However, from time to time, non preferred sizes come into play. When the original fastener sizes were being standardised...
Posted 25th October 2017
Posted 9 years ago
By Unknown
Non Preferred Sizes
All fastener standards have specific sizes which are commonly used. However, from time to time, non preferred sizes come into play. When the original fastener sizes were being standardised...
Posted 21st September 2017
Posted 9 years ago
By Unknown
Slotted Nuts
Slotted nuts are often called castellated nuts. They have slots cut into one side. Typically there are a total of 6 opposing slots, but this number can vary - in very large nuts 8 are common, as...
Posted 21st September 2017
Posted 9 years ago
By Unknown
5/16 UNF hex set screws 3.1/2 inches long
Whilst making bolts, setscrews and other externally threaded rods is not our speciality, we still managed to precision machine these 3.5 inch long (under the head) hexagon set screws in bright...
Posted 21st September 2017
Posted 9 years ago
By Unknown
Slotted Nuts
Slotted nuts are often called castellated nuts. They have slots cut into one side. Typically there are a total of 6 opposing slots, but this number can vary - in very large nuts 8 are common, as...
Posted 21st September 2017
Posted 9 years ago
By Unknown
5/16 UNF hex set screws 3.1/2 inches long
Whilst making bolts, setscrews and other externally threaded rods is not our speciality, we still managed to precision machine these 3.5 inch long (under the head) hexagon set screws in bright...
Posted 13th September 2017
Posted 9 years ago
By Unknown
1.1/4 UNC to M20 Connecting Adapter
In a cost saving exercise for our customer, we manufactured 4 pieces of the unified to metric threaded hexagon connector nuts. Our customer wished to use a brush head on a device that came in...
Posted 13th September 2017
Posted 9 years ago
By Unknown
1.1/4 UNC to M20 Connecting Adapter
In a cost saving exercise for our customer, we manufactured 4 pieces of the unified to metric threaded hexagon connector nuts. Our customer wished to use a brush head on a device that came in...
Posted 12th September 2017
Posted 9 years ago
By Unknown
M16 SPECIAL FLANGE NUTS IN BRASS
We recently manufactured a small batch of just 10 flange nuts out of naval brass for one of our customers. Smaller quantities are not an issue and as you can see, the quality is exceptional.
Posted 12th September 2017
Posted 9 years ago
By Unknown
M16 SPECIAL FLANGE NUTS IN BRASS
We recently manufactured a small batch of just 10 flange nuts out of naval brass for one of our customers. Smaller quantities are not an issue and as you can see, the quality is exceptional.