Check out these beautifully machined spacers. Well, you might ask, why would someone need a spacer? In this instance, they are going to be used to create a space (get it?) between two fixed...
Our customer provided us with some lengths of brass all threaded bar - all we had to do was put a slot on one side so that they become little brass grub screws! We can slot, tap, reduce, resize...
Fasteners such as these present their own manufacturing problems - such a small wall coupled with a short height mean that we had to manufacture some special tooling in order to just thread...
Our customer provided us with some lengths of brass all threaded bar - all we had to do was put a slot on one side so that they become little brass grub screws! We can slot, tap, reduce, resize...
Fasteners such as these present their own manufacturing problems - such a small wall coupled with a short height mean that we had to manufacture some special tooling in order to just thread...
Trojan Special Fasteners just signed off on upgrading their existing ISO 9001:2008 certification to the latest ISO9001:2015 quality management system. We have streamlined our quality processes...
Trojan Special Fasteners just signed off on upgrading their existing ISO 9001:2008 certification to the latest ISO9001:2015 quality management system. We have streamlined our quality processes...
What an interesting nut! Our customer wanted a fastener with a turned down spigot on one end and un chamfered square portion. In typical Trojan fashion, we machined the fasteners in record...
What an interesting nut! Our customer wanted a fastener with a turned down spigot on one end and un chamfered square portion. In typical Trojan fashion, we machined the fasteners in record...
Our customer provided us with an imported sample nut and asked if we could get close to the product they wanted. The finish on their product was absolutely terrible - and the thread wasn't even...
12 yes TWELVE slots on a nut so small... Yes, we machined them with accuracy, ease and speed. These type of slotted nuts tend to go on parts where a degree of fine rotation is needed in...
